Shop
Showing 1–24 results
- The new Smart Device V2 with faster microprocessor with two RGB LED strips Two RGB lighting channels and three fan channels (for voltage regulated or PWM fans) USB 3.1 Gen 2-compatible USB-C connector Iconic cable management bar, and uninterrupted tempered-glass side panel showcase stunning RGB builds Patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
....view more
- Specification Case Size MID TOWER Motherboard Support Mini-ITX, MicroATX, ATX and EATX (Up to 272mm or 10.7-inches) Drive Bays 2.5”: 7 3.5”: 2+2 Expansion Slots 7 Front I/O Port 1x USB 3.1 Gen 2 Type-C 2x USB 3.1 Gen 1 Type-A 1x Headset Audio Jack Front I/O internal header 1x USB 3.1 Gen 2 Internal Header 1x USB 3.1 Gen 1 Internal Header 1x USB 2.0 Internal Header 1x HD Audio Header Color Matte Black Rear I/O Port Front: 3x 120/ 2x 140mm (3 Aer F120 Case Version included) Top: 3x 120/2x 140mm Rear: 1x 120/1x 140mm (1 Aer F140 Case Version included) Material(s) SGCC Steel and Tempered Glass Radiator Support (Front) Front: 2x 140 or 3x 120mm with Push/Pull Top: 2x 140 or 3x 120 Rear: 1x 120 Smart Device V2 3x Fan channels with Max 10W per channel output* 2x RGB LED port support up to 4 x HUE 2 addressable LED strips or 5 x Aer RGB fans Built-in noise detection module *Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters. Vertical GPU Mount Up to 2.5 Slots Included Accessories Installation screws 10x Cable ties 1x Headset Audio Jack Splitter (4 pole to 3 pole) LED Strip(s) 2 integrated addressable LED strips Side Window Tempered glass Fan Specs Aer F120 (Case Version) Speed: 1200 ± 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing Aer F140 (Case Version) Speed: 1,000 ± 200 RPM Airflow: 68.95 CFM Noise: 29 dBA Bearing: Rifle Bearing Clearance Cable Management: 18-22mm GPU Clearance: Up to 413mm Vertical GPU Mount Clearance: 50.8mm CPU Cooler: Up to 185mm Front Radiator: 60mm Top Radiator: 30mm Reservoir & Pump: Up to 224mm (Along cable bar) Dimensions W: 230mm H: 516mm D: 494mm (with feet) Warranty 2 years Weight 12.3KG
....view more
- Specification: General Model: H6 Flow RGB Model Number: CC-H61FW-R1 Type: Mid-Tower Color: White Key Specs Motherboard Support: ATX, Micro-ATX, Mini-ITX Enclosure Type: Mid-Tower Case Material: SGCC Steel, Ultra-Clear Tempered Glass Compatibility & Clearance CPU Cooler Height: 163 mm / 6.42 in GPU Length: 365 mm / 14.37 in PSU Length: 200 mm / 7.87 in Cable Management: 91 mm / 3.58 in Top Radiator: 30 mm / 1.18 in Expansion Slots Standard: 7 Vertical: 0 Drive Bays 2.5": 2 3.5": 1 Fan Support Front-Right: 3 x 120 mm (3 x F120 RGB Core included) Top: 3 x 120 mm / 2 x 140 mm Bottom: 2 x 140 mm Rear: 1 x 120 mm Filters: High-Performance Mesh Fan Specs Model: F120 RGB Core Fan (Case Version) Speed: 1300 ± 130 RPM Airflow: 55.17 CFM Static: 1.27 mm - H₂O Noise: 26.1 dBA Fan Connector: 3-pin Fans Included 3x F120Q Airflow (Case Version) Radiator Support Top: Up to 360 mm Rear: Up to 120 mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height (with feet): 435 mm / 17.13 in Width: 287 mm / 11.3 in Depth: 415 mm / 16.34 in Weight: 9.4 kg Description: NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing Price in Bangladesh NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing - White NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing in white delivers a perfect blend of peak performance and vibrant RGB aesthetics. Designed to support ATX, Micro-ATX, and Mini-ITX motherboards, this mid-tower casing boasts a sleek look with SGCC steel and ultra-clear tempered glass construction. Measuring at 435mm x 287mm x 415mm and weighing 9.4 kg, the H6 Flow RGB offers a compact form factor while accommodating essential components. The dual-chamber design prioritizes GPU cooling, enhancing overall thermal performance and maintaining a clean, uncluttered aesthetic inside the case. Equipped with three pre-installed F120 RGB Core fans, the H6 Flow RGB ensures optimal out-of-the-box cooling and vibrant RGB lighting. These fans operate at 1300 ± 130 RPM, providing a balance between airflow (55.17 CFM) and noise (26.1 dBA). The casing supports additional fan configurations, allowing users flexibility in creating their preferred cooling setup. Featuring a top panel that supports radiators up to 360mm in length, liquid cooling enthusiasts have options to enhance their system's performance. The front I/O ports include two USB 3.2 Gen 1 Type-A, one USB 3.2 Gen 2 Type-C, and a headset audio jack, catering to modern connectivity needs. The H6 Flow RGB stands out with wraparound glass panels offering an unobstructed view of the interior, showcasing key components. The airflow-optimized perforation pattern on the top and side panels enhances overall performance while filtering dust. With an intuitive cable management system that utilizes wide channels and straps, the build process is simplified, ensuring a tidy interior. Tool-free access to the top and side panels further streamlines the upgrading process for users. In summary, the NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing delivers a balanced blend of performance, RGB aesthetics, and user-friendly features, making it an excellent choice for PC enthusiasts looking to create a powerful and visually striking system.
....view more
- Specification: General Model: H6 Flow RGB Model Number: CC-H61FB-R1 Type: Mid-Tower Color: Black Key Specs Motherboard Support: ATX, Micro-ATX, Mini-ITX Enclosure Type: Mid-Tower Case Material: SGCC Steel, Dark Tinted Tempered Glass (Black SKU only) Compatibility & Clearance CPU Cooler Height: 163 mm / 6.42 in GPU Length: 365 mm / 14.37 in PSU Length: 200 mm / 7.87 in Cable Management: 91 mm / 3.58 in Top Radiator: 30 mm / 1.18 in Expansion Slots Standard: 7 Vertical: 0 Drive Bays 2.5": 2 3.5": 1 Fan Support Front-Right: 3 x 120 mm (3 x F120 RGB Core included) Top: 3 x 120 mm / 2 x 140 mm Bottom: 2 x 140 mm Rear: 1 x 120 mm Filters: High-Performance Mesh Fan Specs Model: F120 RGB Core Fan (Case Version) Speed: 1300 ± 130 RPM Airflow: 55.17 CFM Static: 1.27 mm - H₂O Noise: 26.1 dBA Fan Connector: 3-pin Fans Included 3x F120Q Airflow (Case Version) Radiator Support Top: Up to 360 mm Rear: Up to 120 mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height (with feet): 435 mm / 17.13 in Width: 287 mm / 11.3 in Depth: 415 mm / 16.34 in Weight: 9.4 kg Description: NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing Price in Bangladesh NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing - Black NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing in black delivers a perfect blend of peak performance and vibrant RGB aesthetics. Designed to support ATX, Micro-ATX, and Mini-ITX motherboards, this mid-tower casing boasts a sleek look with SGCC steel and dark-tinted tempered glass construction. Measuring at 435mm x 287mm x 415mm and weighing 9.4 kg, the H6 Flow RGB offers a compact form factor while accommodating essential components. The dual-chamber design prioritizes GPU cooling, enhancing overall thermal performance and maintaining a clean, uncluttered aesthetic inside the case. Equipped with three pre-installed F120 RGB Core fans, the H6 Flow RGB ensures optimal out-of-the-box cooling and vibrant RGB lighting. These fans operate at 1300 ± 130 RPM, providing a balance between airflow (55.17 CFM) and noise (26.1 dBA). The casing supports additional fan configurations, allowing users flexibility in creating their preferred cooling setup. Featuring a top panel that supports radiators up to 360mm in length, liquid cooling enthusiasts have options to enhance their system's performance. The front I/O ports include two USB 3.2 Gen 1 Type-A, one USB 3.2 Gen 2 Type-C, and a headset audio jack, catering to modern connectivity needs. The H6 Flow RGB stands out with wraparound glass panels offering an unobstructed view of the interior, showcasing key components. The airflow-optimized perforation pattern on the top and side panels enhances overall performance while filtering dust. With an intuitive cable management system that utilizes wide channels and straps, the build process is simplified, ensuring a tidy interior. Tool-free access to the top and side panels further streamlines the upgrading process for users. In summary, the NZXT H6 Flow RGB Compact Dual-Chamber Mid-Tower Airflow Casing delivers a balanced blend of performance, RGB aesthetics, and user-friendly features, making it an excellent choice for PC enthusiasts looking to create a powerful and visually striking system.
....view more
- SPECS: Casing Motherboard Support Mini-ITX, Micro-ATX, ATX CPU Clearance Front:Up To 360mm With Push/Pull Top:Up To 360mm Rear:Up To 140mm Max CPU Cooler Clearance:Up To 185mm Max GPU Clearance:Up To 400mm Front Radiator Clearance:60mm Top Radiator Clearance:30mm Cable Management:18-22mm Case Type Mid-Tower Cooling System Fan Support Front: 3 X 120mm / 3 X 140mm (3 X F Series RGB Core 140mm Included) Top: 3 X 120mm / 2 X 140mm Rear: 1 X 120mm / 1 X 140mm (1 X F Series Quiet 140mm (Case Version) Included) Ports I/O Port USB 3.2 Gen 1 Type-A:2 USB 3.2 Gen 2 Type-C:1 Headset Audio Jack:1 Drive Bay(S) 2.5":4+2 3.5":2 Physical Specification Form Factor ATX Color White Expansion Slots 7 Maximum GPU Length Up To 400mm Materials SGCC Steel, Ultra-Clear Tempered Glass Cable Management Space 18-22mm Dimension Height (With Feet): 505mm Height (Without Feet): 480mm Width: 230mm Depth: 480mm Weight 10.57kg NZXT H7 Flow RGB ATX Mid-Tower Case in Bangladesh The NZXT H7 Flow RGB ATX Mid-Tower Case, is a top-tier choice for those looking to build a PC with style and functionality. This case is designed to keep your components cool, featuring three pre-installed 140mm RGB Core fans and one F120Q Quiet Airflow fan. The perforated front and top panels enable maximum thermal performance, ensuring your system stays cool even under heavy loads. The intuitive cable management system with wide channels, hooks, and straps makes building your dream PC a breeze. The case offers tool-less access to front and side panels, with tinted panels available on the black variant. It supports radiators up to 360mm at the front and top, providing ample cooling options for high-performance systems. The case can connect multiple F140 RGB Core fans to the 5V ARGB header on the motherboard, allowing for a vibrant and customizable lighting setup. Vertical GPU mounting is supported (though the mount is sold separately), allowing for a unique and eye-catching component display. The case comes in two color options, Matte Black and Matte White, to match any build aesthetic. Lastly, the case features two top-mounted USB 3.2 Type-A ports and one top-mounted USB 3.2 Type-C port for easy access and connectivity.
....view more
-Mid-Tower-Airflow-Casing---Black-600x600.jpg)
- Specification: General Model: H7 Flow Model Number: CM-H71FB-01-Black Type: Mid-Tower Color: Black Key Specs Motherboard Support: Mini-ITX, Micro-ATX, ATX, and EATX (Up to 272mm) Enclosure Type: Mid-Tower Case Material: SGCC Steel, Tempered Glass Compatibility & Clearance Max CPU Cooler Clearance: Up to 185mm Max GPU Clearance: Up to 400mm Front Radiator Clearance: 60mm Top Radiator Clearance: 30mm Cable Management: 18-22mm Expansion Slots Standard: 7 Vertical: 0 Drive Bays 2.5": 4+2 3.5": 2 Fan Support Front: 3 x 120mm / 3 x 140mm Top: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Filters: All Air Intakes Fan Specs Model: F120Q (Case Version) Speed: 1200 ± 240RPM Airflow: 62.18 CFM Static: 1.05 mm - H2O Noise: 25.1 dBA Fan Connector: 3-pin Radiator Support Front: Up to 360mm with Push/Pull Top: Up to 360mm Rear: Up to 140mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height: 505mm (With Feet) Width: 230mm Depth: 480mm Weight: 10.05 kg Description: NZXT H7 Flow (CM-H71FB-01-Black) Mid-Tower Airflow Casing - Black NZXT H7 Flow (CM-H71FB-01-Black) Mid-Tower Airflow Casing - Black is ready to bring the cool. Featuring a perforated front and top panel, alongside widened channels, hooks, straps, and toolless entry, this sleek case will keep any build cool and comfortable while offering plenty of space. This beautiful casing is made of SGCC steel and tempered glass and can support radiators up to 360mm in size. Plus, it comes with two pre-installed 120mm fans for quiet and efficient cooling. Here are some other great features of the NZXT H7 Flow: - Intuitive cable management system with wide channels, hooks, and straps - Tool-less access to front and side panels - Front and top support for radiators up to 360mm - Includes two F Series Quiet 120mm Fans - Supports vertical GPU mounting - 2 Pre Installed Fans Included
....view more
- Specification: Case Type Type Mid-Tower Tempered Glass Panel Yes Motherboard Support Mini-ITX, Micro-ATX, ATX External Features Color(s) White Material SGCC Steel, Ultra-clear Tempered Glass, Dark Tinted Tempered Glass (Black only) Weight 12.1 kg Dimensions Height: 495mm (With Feet) Width: 290mm Depth: 446mm Front Ports 2 x USB 3.2 Gen 1 Type-A: 1 x USB 3.2 Gen 2 Type-C 1 x Headset Audio Jack Expansion Slots Standard: 7 Radiator Support Side: Up to 360mm with Push/Pull Top: Up to 360mm Bottom: Up to 360mm Rear: Up to 120mm Fan Support Side: 3 x 120mm Top: 3 x 120mm / 2 x 140mm Bottom: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm Filters: All Air Intakes Pre- Installed Fans Front: 1 x 120 mm Side: 3 x 120 mm Drive Bays 2.5": 4+2 3.5": 2 Additional Feature PSU Not Included Clearance Space Maximum CPU Cooler Height Up to 165mm Maximum Graphics Card Length Up to 435mm Maximum PSU Length 200mm Warranty Warranty No Warranty Description NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing White The NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing White ensures a seamless start to your next build, prioritizing optimal airflow. Whether you're a novice or experienced builder, the H9 Flow simplifies component installation and offers ample space for gaming-focused components and efficient cooling capabilities. Complete access is granted with the ability to remove each of the steel and tempered glass panels, providing a full 360° experience. Comfortably accommodate Mini-ITX, Micro-ATX, and ATX motherboards with 6.5" of CPU cooler clearance. Seven full-sized expansion slots are available, allowing for the installation of powerful graphics cards up to 17.1" in length while maintaining airflow around other components. The H9 Flow comes equipped with four pre-installed 120mm fans, ensuring quiet operation and minimal noise. Connect a variety of peripherals with ease using the two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port, and a single 3.5mm combo audio jack. From controllers to headsets, this casing offers the versatility you need. Drive Bays. There is enough space inside the NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing to accommodate a variety of storage disks. There are two 3.5"/2.5" bays and four 2.5" drive bays altogether. The drive cage may be modified to accommodate bigger power sources or, if you'd like, removed entirely. If necessary, two 2.5" drive sleds can be transferred from the PSU shroud to the rear of the motherboard tray.. Fan & Radiator Support. . Although there are four 120mm fans supplied, the H9 Flow's top bracket can accommodate a total of three 120mm or two 140mm fans. The H9 Flow can accommodate three 120mm fans on the sides and a single 120 or 140mm exhaust fan at the back. The design also allows you to install three 120mm or two 140mm fans at the bottom. Up to 360mm and up to 120mm liquid cooling radiators may be supported on the side, top, and bottom, respectively.. Easy to Build The NZXT H9 Flow Dual-Chamber Mid-Tower Airflow Casing Tool-less front and side access enables you to quickly access your components without the need for screwdrivers. Easily route cables on the inside of the H9 Flow with a 3.5" cable management space. You also get wide cable channels as well as hooks and straps to secure your cables down.
....view more
- Specification: Key Specs Motherboard Support: Mini-ITX, Micro-ATX, ATX Enclosure Type: Mid-Tower Case Material: SGCC Steel, Ultra-clear Tempered Glass, Dark Tinted Tempered Glass (Black only) Compatibility & Clearance Max CPU Cooler Clearance: Up to 165mm Max GPU Clearance: Up to 435mm PSU Clearance:200mm Cable Management:91mm Expansion Slots Standard:7 Vertical:0 Drive Bays 2.5":4+2 3.5":2 Fan Support Side:3 x 120mm Top:3 x 120mm / 2 x 140mm Bottom:3 x 120mm / 2 x 140mm Rear:1 x 120mm Filters: All Air Intakes Fan Specs Model: F120Q (Case Version) Speed: 1200 ± 240RPM Airflow: 62.18 CFM Static: 1.05 mm - H2O Noise: 25.1 dBA Fan Connector: 3-pin Radiator Support Side: Up to 360mm with Push/Pull Top: Up to 360mm Bottom: Up to 360mm Rear: Up to 120mm Front I/O Ports USB 3.2 Gen 1 Type-A:2 USB 3.2 Gen 2 Type-C:1 Headset Audio Jack:1 Weight & Dimensions Height:495mm (With Feet) Width:290mm Depth:466mm Weight:12.1 kg Description: NZXT CM-H91FW-01 H9 Flow Edition ATX Mid Tower Casing - White The H9 Flow is designed to cool off powerful GPUs with its expansive thermal capabilities, featuring the capacity for ten fans and numerous 360mm radiator mounting options and the perforated top panel takes cooling even further. Unique uninterrupted glass panel for a clear view of the interior Intuitive cable management and dual chamber design Room for ten fans or three 360mm Radiators Perforated top panel for enhanced cooling Direct airflow to the GPU for handling high-powered components Enhanced experience with other products from the NZXT ecosystem Includes four F Series 120mm Quiet Airflow fans
....view more
- Specification: Case Type Type Mid-Tower Tempered Glass Panel Yes Motherboard Support Mini-ITX, Micro-ATX, ATX, and EATX (Up to 272mm) External Features Color(s) Black Material SGCC Steel, Tempered Glass Weight 11.36 kg Dimensions Height: 505mm (With Feet) Width: 230mm Depth: 480mm Front Ports 2 x USB 3.2 Gen 1 Type-A 1 x USB 3.2 Gen 2 Type-C 1 x Headset Audio Jack Expansion Slots Standard: 7 Radiator Support Front: Up to 360mm with Push/Pull Top: Up to 360mm Rear: Up to 140mm Fan Support Front: 3 x 120mm / 3 x 140mm Top: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Filters: All air intakes Pre- Installed Fans Front: 3 x 140 mm Rear: 1 x 140 mm Drive Bays 2.5”: 4+2 3.5”: 2 Clearance Space Maximum CPU Cooler Height Up to 185mm Maximum Graphics Card Length Up to 400mm Warranty Warranty No Warranty Description: NZXT H7 Flow ATX Mid-Tower Airflow Casing White-Black The NZXT H7 Elite Mid-Tower Casing is the ultimate enthusiast choice, with a tempered glass front panel displaying three pre-installed 140mm F Series RGB Fans, a built-in RGB & Fan Controller, expanded channels, hooks, straps, and toolless access. For total 360° access, each of the steel and tempered glass panes may be removed. You receive ample space to easily install Mini-ITX, Micro-ATX, ATX, and E-ATX (up to 272mm) motherboards and 7.3 "of space for CPU coolers There are seven full-sized expansion slots available for powerful graphics cards spanning up to 15.7 inches "long while still allowing air to circulate around the rest of your components. The H7 Elite comes with four 140mm fans, three of which are RGB capable, enabling you to add a layer of customization to your rig and make it the center point of your gaming area. Two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C connector, and a single 3.5mm combination audio jack is provided, allowing you to connect a variety of devices ranging from controllers to headphones. Drive Bays The NZXT H7 Elite Premium Mid-Tower Casing provides ample space to accommodate a variety of storage devices. A total of six 2.5" drives and two 3.5" drives may be safeguarded. The drive cage may be modified to accommodate a bigger power supply or removed entirely if desired. If necessary, two 2.5" drive sleds can be relocated from the rear of the motherboard tray to the PSU shroud. Fan & Radiator Support The front three LED-equipped 140mm fans are supported by an integrated RGB and fan controller, allowing you to personalize your setup in a variety of colors. The top of the H7 Elite can accommodate three 120mm or two 140mm fans, while the rear can accommodate a single 120mm or 140mm exhaust fan with one already fitted. The front and top of the H7 Elite can accommodate liquid cooling radiators up to 360mm in diameter, while the rear can accommodate radiators up to 140mm in diameter. Simple to Build Tool-free front and side access allow you to rapidly access your components without using screwdrivers. With a 0.9" cable management area on the interior of the H7 Elite, you can easily route wires. You also get plenty of cable channels, as well as hooks and straps to keep your connections in place. The NZXT H7 Elite Premium Mid-Tower Casing has no warranty.
....view more
-Premium-Mid-Tower-Casing---Black-3-600x600.jpg)
- Specification: General Model: H7 Elite Model Number: CM-H71EB-01-Black Type: Mid-Tower Color: Black Key Specs Motherboard Support: Mini-ITX, Micro-ATX, ATX, and EATX (Up to 272mm) Enclosure Type: Mid-Tower Case Material: SGCC Steel, Tempered Glass Compatibility & Clearance Max CPU Cooler Clearance: Up to 185mm Max GPU Clearance: Up to 400mm Front Radiator Clearance: 60mm Top Radiator Clearance: 30mm Cable Management: 18-22mm Expansion Slots Standard: 7 Vertical: 0 Drive Bays 2.5": 4+2 3.5": 2 Fan Support Front: 3 x 120mm / 3 x 140mm Top: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Filters: All Air Intakes Fan Specs Model: F140Q (Case Version) Speed: 1200 ± 240RPM Airflow: 99.56 CFM Static Pressure: 1.14 mm-H2O Noise: 24.18 dBA Fan Connector: 3-pin Model: F140 RGB Speed: 500 - 1800 RPM Airflow: 24.85 - 89.48 CFM Static Pressure: 0.94 - 3.39 mm-H2O Noise: 20 - 32.5 dBA Fan Connector: 4-pin Fan Channels: 3 NZXT RGB Connector: 6 (Support up to 120 LEDs) Radiator Support Front: Up to 360mm with Push/Pull Top: Up to 360mm Rear: Up to 140mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height: 505mm (With Feet) Width: 230mm Depth: 480mm Weight: 11.36 kg Description: NZXT H7 Elite (CM-H71EB-01-Black) Premium Mid-Tower Casing - Black NZXT H7 Elite (CM-H71EB-01-Black) Premium Mid-Tower Casing - Black is the premier choice for enthusiasts, featuring a tempered glass front panel to show off three pre-installed 140mm F Series RGB Fans, a built-in RGB & Fan Controller, widened channels, hooks, straps, and toolless entry. Here are some of the great features of the NZXT H7 Elite: - support for Mini-ITX, Micro-ATX, ATX, and EATX motherboards - SGCC steel construction for durability - tempered glass panels for a stylish look - support for up to 360mm radiators - three pre-installed fans for great airflow - perforated top panel for improved ventilation - intuitive cable management system - tool-less access to front and side panels - supports vertical GPU mounting
....view more
-Premium-Mid-Tower-Casing---White-600x600.jpg)
- Specification: General Model: H7 Elite Model Number: CM-H71EW-01-White Type: Mid-Tower Color: White Key Specs Motherboard Support: Mini-ITX, Micro-ATX, ATX, and EATX (Up to 272mm) Enclosure Type: Mid-Tower Case Material: SGCC Steel, Tempered Glass Compatibility & Clearance Max CPU Cooler Clearance: Up to 185mm Max GPU Clearance: Up to 400mm Front Radiator Clearance: 60mm Top Radiator Clearance: 30mm Cable Management: 18-22mm Expansion Slots Standard: 7 Vertical: 0 Drive Bays 2.5": 4+2 3.5": 2 Fan Support Front: 3 x 120mm / 3 x 140mm Top: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Filters: All Air Intakes Fan Specs Model: F140Q (Case Version) Speed: 1200 ± 240RPM Airflow: 99.56 CFM Static Pressure: 1.14 mm-H2O Noise: 24.18 dBA Fan Connector: 3-pin Model: F140 RGB Speed: 500 - 1800 RPM Airflow: 24.85 - 89.48 CFM Static Pressure: 0.94 - 3.39 mm-H2O Noise: 20 - 32.5 dBA Fan Connector: 4-pin Fan Channels: 3 NZXT RGB Connector: 6 (Support up to 120 LEDs) Radiator Support Front: Up to 360mm with Push/Pull Top: Up to 360mm Rear: Up to 140mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height: 505mm (With Feet) Width: 230mm Depth: 480mm Weight: 11.36 kg Description: NZXT H7 Elite (CM-H71EW-01-White) Premium Mid-Tower Casing - White NZXT H7 Elite (CM-H71EW-01-White) Premium Mid-Tower Casing - White is the premier choice for enthusiasts, featuring a tempered glass front panel to show off three pre-installed 140mm F Series RGB Fans, a built-in RGB & Fan Controller, widened channels, hooks, straps, and toolless entry. Here are some of the great features of the NZXT H7 Elite: - support for Mini-ITX, Micro-ATX, ATX, and EATX motherboards - SGCC steel construction for durability - tempered glass panels for a stylish look - support for up to 360mm radiators - three pre-installed fans for great airflow - perforated top panel for improved ventilation - intuitive cable management system - tool-less access to front and side panels - supports vertical GPU mounting
....view more
- Specification: Key Specs Motherboard Support: Mini-ITX, Micro-ATX, ATX Enclosure Type: Mid-Tower Case Material: SGCC Steel, T Ultra-clear Tempered Glass, Dark Tinted Tempered Glass (Black only) Compatibility & Clearance CPU Cooler Clearance: Up to 165mm GPU Clearance: Up to 435mm PSU Clearance:200mm Cable Management:91mm Expansion Slots Standard:7 Vertical:0 Drive Bays 2.5":4+2 3.5":2 Fan Support Side: 3 x 120mm Top: 3 x 120mm / 2 x 140mm Bottom: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm Filters: All Air Intakes Fan Specs Model: F120Q (Case Version) Speed: 1200 ± 240RPM Airflow: 62.18 CFM Static: 1.05 mm - H2O Noise: 25.1 dBA Fan Connector: 3-pin Model: F120RGB Duo Speed: 500 ± 1800RPM Airflow: 48.58 CFM Static: 2.42mm - H2O Noise: 29 dBA Fan Connector: 4-pin Radiator Support Side: Up to 360mm Top: Up to 360mm Bottom: Up to 360mm Rear: Up to 120mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height: 495mm (With Feet) Width: 290mm Depth: 466mm Weight: 13.1 kg Description: NZXT CM-H91EB-01 H9 Elite Edition ATX Mid Tower Casing - Black The H9 Elite is designed to show off every angle of your build with a tempered glass top panel and a built-in RGB & Fan Controller. The unique wraparound glass design with a dual-chamber layout is the perfect showcase for premium components. Unique uninterrupted glass panel for a clear view of the interior Intuitive cable management and dual chamber design Room for ten fans or three 360mm Radiators Tempered glass top panel and included RGB & Fan Controller Direct airflow to the GPU for handling high-powered components Enhanced experience with other products from the NZXT ecosystem Includes three F Series 120mm RGB Duo Fans and one F120Q Fan
....view more
- Specification: Key Specs Motherboard Support: Mini-ITX, Micro-ATX, ATX Enclosure Type: Mid-Tower Case Material: SGCC Steel, T Ultra-clear Tempered Glass, Dark Tinted Tempered Glass (Black only) Compatibility & Clearance CPU Cooler Clearance: Up to 165mm GPU Clearance: Up to 435mm PSU Clearance:200mm Cable Management:91mm Expansion Slots Standard:7 Vertical:0 Drive Bays 2.5":4+2 3.5":2 Fan Support Side: 3 x 120mm Top: 3 x 120mm / 2 x 140mm Bottom: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm Filters: All Air Intakes Fan Specs Model: F120Q (Case Version) Speed: 1200 ± 240RPM Airflow: 62.18 CFM Static: 1.05 mm - H2O Noise: 25.1 dBA Fan Connector: 3-pin Model: F120RGB Duo Speed: 500 ± 1800RPM Airflow: 48.58 CFM Static: 2.42mm - H2O Noise: 29 dBA Fan Connector: 4-pin Radiator Support Side: Up to 360mm Top: Up to 360mm Bottom: Up to 360mm Rear: Up to 120mm Front I/O Ports USB 3.2 Gen 1 Type-A: 2 USB 3.2 Gen 2 Type-C: 1 Headset Audio Jack: 1 Weight & Dimensions Height: 495mm (With Feet) Width: 290mm Depth: 466mm Weight: 13.1 kg Description: NZXT CM-H91EW-01 H9 Elite Edition ATX Mid Tower Casing - White The H9 Elite is designed to show off every angle of your build with a tempered glass top panel and a built-in RGB & Fan Controller. The unique wraparound glass design with a dual-chamber layout is the perfect showcase for premium components. Unique uninterrupted glass panel for a clear view of the interior Intuitive cable management and dual chamber design Room for ten fans or three 360mm Radiators Tempered glass top panel and included RGB & Fan Controller Direct airflow to the GPU for handling high-powered components Enhanced experience with other products from the NZXT ecosystem Includes three F Series 120mm RGB Duo Fans and one F120Q Fan
....view more
Featured Products
AMD Ryzen 5 5600X Processor
৳ 19000
৳ 20000
Corsair Katar PRO Ultra Light Gaming Mouse Black
৳ 1400
৳ 1400
VALUE TOP T22VF 21.5 INCH FULL HD LED MONITOR
৳ 8600
৳ 9000
Cooler Master Hyper 212 LED Turbo ARGB Air CPU Cooler
৳ 4500
৳ 5000
DeepCool AK400 ZERO DARK PLUS CPU Cooler
৳ 3550
৳ 4000
Corsair iCUE H115i 280mm Elite Capellix Liquid CPU Cooler
৳ 15500
৳ 16000
Top Rated Products
NZXT H510 ELITE COMPACT ATX MID TOWER CASE (MATTE BLACK)
৳ 13000
৳ 13000
Asus PRIME B760-PLUS D4 DDR4 Intel Motherboard
৳ 22500
৳ 22500
CORSAIR VENGEANCE LPX 8GB DDR4 3200MHZ DESKTOP RAM
৳ 2700
৳ 3000
Intel Arc A750 Limited Edition 8GB GDDR6 Graphics Card
৳ 28000
৳ 32000
Acer RE100 128GB 2.5" SATA lll SSD
৳ 2100
৳ 2550
Top Selling Products
Asus TUF Gaming Z690-Plus D4 12th Gen ATX Motherboard
৳ 26000
৳ 28600
HP M22f 22" FHD IPS Monitor
৳ 14600
৳ 15100
AMD Ryzen 5 5600G Processor with Radeon Graphics (LOCAL BOX)
৳ 13500
৳ 15000
PC POWER ICE CUBE WHITE DESKTOP GAMING CASING
৳ 5900
৳ 6200
Delivery
With sites, we ship to all over Bangladesh & it's regions.
Safe Payment
Pay with the world’s most popular and secure payment methods.
Shop with Confidence
Our Buyer Protection covers your purchase from click to delivery.
24/7 Help Center
Round-the-clock assistance for a smooth shopping experience.