Shop
Showing 1–24 results
- Description: Gamdias APOLLO E2 Elite Mid Tower Gaming Case The APOLLO E2 Elite inherits the same front dual 200mm ARGB Trio ring fans and with the new added swinging tempered glass side panel is out to impress. Superfluous air flow from the giant front fans delivers the cooling performance needed for the most powerful gaming setups. Blow Your Mind Dual built-in 200mm ARGB LED fans in the front panel not only bring a sensational visual feast, also generate high air flow through the case. Astonish in the cool world that APOLLO E2 Elite has made. One Press and Sync All Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port. Magnetic Dust Filter A magnetically held dust filter, located on top of the APOLLO E2 Elite to minimize dust entering the case. The magnets holding the dust filter in place, makes it easy to remove and clean the washable dust filter. Out of the Ordinary The APOLLO E2 Elite comes with a single side magnetic closing tempered glass swinging door. Not only showcasing all the components, also makes modding easier and more convenient. Ample Accommodation The accommodation inside APOLLO E2 Elite is able to support up to six 120mm fans. Mounting points for 280mm, 240mm radiators at the top and additional 360mm at front, 140mm or 120 mm radiator in the rear. Elite Expansion The APOLLO E2 Elite's internal volume is 15% larger than it's predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available.
....view more
- Description Gamdias Apollo M1 Elite MID Tower Gaming Case Gamdias Apollo M1 Elite Mid Tower Case comes with two extremely large 200mm ARGB fans. These fans are effective at building up airflow and cooling down internal components. Enormous fans simultaneously satisfy the pursuit of cooling efficiency and the satisfaction of having two 200mm ARGB fans. Adopting an asymmetry mesh as a front panel provides not only a unique look but also maximum airflow through the case. Each I/O port is surrounded by neo chrome streaming light with more than 20 lighting effects. It supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes it easier to unite your case from RGB chaos to pleasing visual effects. It has a vented power supply shroud at the bottom of the case that surrounds the PSU with cutouts displaying the side of the PSU. A magnetically held dust filter, located on top of the case to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter. The side tempered glass is inserted from the back of the case, leaving thumbscrews to hold the tempered glass in place. To achieve the best PC building experience the APOLLO M1 Elite has an enlarged cable management compartment behind the mainboard plate. Tuck away all your excess cables for an extra clean system and improved case airflow. It is able to support up to three 120mm or 140mm fans upfront. Multiple mounting points for 360/280mm radiators up front, 280/240mm, and a 120mm radiator at the rear. It has no warranty.
....view more
- Specification Case Type Type Mid Tower / Small Form Factor (SFF) Case Front Panel RGB-Lit Y-Shaped Crater Design Front Panel Tempered Glass Panel Panoramic Tempered Glass Motherboard Support mini-ITX, microATX, ATX External Features Color(s) Black Weight 4.2 kg / 9.3 lb Dimensions 388 x 230 x 460 mm 15.2 x 9 x 18.1 inch Expansion Slots 7+3 Radiator Support Top:280 mm, 240mm Rear:140 mm, 120mm Fan Support Top: 2 x 120mm , 2 x 140mm Rear: 1 x 120mm , 1 x 140mm Pre- Installed Fans Rear: 1 x 120mm Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) 3 x 2.5" I/O Port USB 3.0 x1, USB 2.0 x2, HD Audio x1, LED Control x1 Additional Feature Side Panel Panoramic tempered glass side panel Clearance Space Maximum CPU Cooler Height 190mm Maximum Graphics Card Length 340mm Warranty Warranty No Warranty Description Gamdias Argus E2 Elite Mid Tower RGB PC Gaming Case The new Gamdias Argus E2 Elite Mid Tower RGB PC Case sticking out with its compact stature and chroma-lit Y-shaped crater front panel design, the ARGUS E2 Elite gives off a futuristic vibe as the Little Giant presents itself in a fashionable debut. Nimble, Elegant, and Concise are the trademarks easily recognizable from the ARGUS E2 Elite PC Gaming Case. This casing compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and AS Rock Polychrome Motherboard RGB application and also capable of synchronizing with any Motherboard that comes with a 5V 3-Pin addressable RGB header. Rev up the stakes with a series of breathtaking chromatic lighting effect with the hundred-eye giant. It aesthetically stunning battle-station on display with pride through the 4 mm tinted panoramic tempered glass side panel, while taking your legendary battles to the next stratosphere. In this case, Ample Accommodation supporting up to five 120mm fans. Mounting points for a 240mm radiator at the top, a 120 mm radiator in the rear, and two 120mm radiators at the bottom. And also support 2 x 3.5" or 1 x 2.5"+1 x 3.5" HDD cage, 295mm VGA, 150mm PSU. Here, HD audio jack and a highly-efficient 3.0 + 2.0 USB port, the easily-accessible RGB light-saber power-switch located at the surface of the I/O port that allows you to effortlessly cycle through over 15 chromatic lighting-effects consisting of 16.8 million colors via a simple tap of your finger-tip.
....view more
- Description Gamdias ARGUS E3 Mid Tower Gaming Case Unique Design of the I/O Port Craving for more RGB effects? ARGUS E3 satisfies all your desire. Each I/O port on the anterior panel is surrounded by rainbow streaming light with an independent switch. Panoramic Tempered Glass Every artwork should be seen. Display your internal rig with the 4mm tinted panoramic tempered glass side panel. Let the masterpiece astonish whole planet! Rev Up the Atmosphere Being compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AS Rock Polychrome motherboard RGB software, ARGUS E3 is able to synchronize with any MB that incorporates with a 5V 3-Pin addressable RGB header. Rev up the gaming atmosphere through these sensational lighting effects by ARGUS E3 now! Ample Accommodation The accommodation inside ARGUS E3 is able to support up to five 120mm fans. Mounting points for a 240mm radiator at the top, and a 120 mm radiator in the rear. Minimal, with a modern twist Stand out with a diamond cut design front panel and two RGB light strips, ARGUS E3 presents as a futuristic manner for a showcase. Concise, elegant and stylish are the hallmarks of the ARGUS series.
....view more
- Description Gamdias ARGUS E4 Elite Mid Tower Gaming Case The ARGUS E4 Elite improves on the ARGUS E4 with a new magnetically closed swinging tempered glass side panel as well as increase in overall capacity and compatibility. This makes the ARGUS E4 Elite one of the best entry level ARGB tempered glass cases on the market. Minimal, with a modern twist Stand out with the crossed cutting design front panel and two RGB light strips, ARGUS E4 Elite presented as a futuristic manner for a showcase. Concise, elegant and stylish are the hallmarks of the ARGUS series. Rev Up the Atmosphere Being compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AS Rock Polychrome motherboard RGB software, ARGUS E4 Elite is able to synchronize with any MB that incorporates with a 5V 3-Pin addressable RGB header. Rev up the gaming atmosphere with sensational lighting effects by ARGUS E4 Elite now! Out of the Ordinary The ARGUS E4 Elite comes with a single side magnetic closing tempered glass swinging door. Not only showcasing all the components, also makes modding easier and more convenient. Elite Expansion The ARGUS E4 Elite internal volume is 15% larger than it's predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available. One Press and Sync All Handy I/O port on the top of the case featuring a RGB light strips control button, allowing you cycle through all the lighting effects by simply pressing a button. High-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button. Ample Accommodation The accommodation inside ARGUS E4 Elite is able to support up to three 120mm or 140mm fans. Mounting points for 280mm, 240mm radiators at the top and 140mm or 120 mm radiator in the rear.
....view more
- Specification: Case Type Type MID Tower Tempered Glass Panel Side Swing Magnetic Closing Tempered Glass Window Motherboard Support mini-ITX, micro-ATX, ATX External Features Color(s) White Weight 5.4 kg Dimensions 393 x 230 x 460 mm Expansion Slots 7+3 Radiator Support Top:120mm, 140mm, 240mm, 280 mm Fan Support Top: 2 x 120mm , 2 x 140mm Rear: 1 x 120mm , 1 x 140mm Pre- Installed Fans Rear: 1 x 120mm Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) 3 x 2.5" I/O Port USB 3.0 x1, USB 2.0 x2, HD Audio x1, LED Control x1 Additional Feature PSU 180mm Side Panel Side Swing Magnetic Closing Tempered Glass Window Clearance Space Maximum CPU Cooler Height 190mm Maximum Graphics Card Length 340mm Warranty Warranty No Warranty Description Gamdias ARGUS E4 Elite Mid Tower Gaming Case White The ARGUS E4 ELITE WH is a white mid-tower case that improves on the ARGUS E4 by adding a tempered glass side panel swing door and increasing overall capacity and compatibility, making it one of the best budget cases available. Improved Perspective A scenario that bridges the gap between the present and the future. The attractive enameled white casing is completed on the front panel with an ARGB crossed cutting motif. Swing Door with Tempered Glass The ARGUS E4 Elite WH Gaming Case from Gamdias There is a glass door on this unit. The side-tempered glass swing door is strong, scratch-resistant, and transparent, allowing you to see your building. Elite Expansion The Gamdias ARGUS E4 Elite WH Gaming Case features a 15% greater internal space than its predecessor, allowing it to accept high-end CPU coolers, VGA cards up to 340mm, and PSUs up to 180mm in length. Rev Up the Atmosphere ARGUS E4 Elite WH can synchronize with any motherboard that has a 5V 3-Pin addressable RGB connector and is compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and AS Rock Polychrome motherboard RGB software. Now is the time to enhance the game experience with ARGUS E4 Elite's incredible lighting effects! One-Press and Sync All An RGB light strips control button is included on the top of the casing, allowing you to cycle between all of the lighting effects by just pushing a button. USB 3.0, two USB 2.0 ports, an HD audio connector, and a power button are all included. Ample Accommodation Up to three 120mm or 140mm fans may be accommodated inside the ARGUS E4 Elite. At the top, there are mounting points for 280mm and 240mm radiators, and at the back, there are mounting points for 140mm and 120mm radiators. The Gamdias ARGUS E4 Elite Mid Tower Gaming Case White has no warranty.
....view more
- Specification Case Type Type MID Tower Tempered Glass Panel Tempered glass Side Panel Motherboard Support ATX, Micro-ATX, Mini-ITX External Features Color(s) Black Weight 4.5 kg/ 9.9lb Dimensions 352 x 200 x 442 mm 13.9 x 7.9 x 17.4 inch Expansion Slots 7 Radiator Support Top: 240 mm Rear: 120 mm Fan Support Top: 2 x 120mm Front: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm Pre- Installed Fans Rear: 1 x 120mm ARGB Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5" I/O Port USB 3.0 x1, USB 2.0 x2, HD Audio x1, LED Control x1 Additional Feature PSU PSU length limitation: 150mm Side Panel Tempered glass Clearance Space Maximum CPU Cooler Height 160mm Maximum Graphics Card Length 260mm Warranty Warranty No Warranty Description Gamdias ARGUS E5 Mid Tower Gaming Case The Gamdias ARGUS E5 is a stylish mid-tower case with a diagonal RGB streaming light with a vibrant underglow beneath the panel, and a panoramic tempered glass side panel to show off the built-in ARGB fan and the beauty of your build. It features an ambient diagonal ARGB stream lighting on the front panel that reflects light off the surface below the panel creating a rich and vibrant underglow. It comes with a tool-free panoramic seamless tempered glass side panel. It has 1 Built-in 120mm ARGB Rear Fan. The Gamdias ARGUS E5 casing supports RGB connection to compatible motherboards in order to achieve system-wide lighting synchronization, making it easier to unite the case from chaos to calm. It supports one Touch to Easily Switch RGB Streaming Lighting Style. The Magnetic Dust Filter protects the inner components from dust. The Gamdias ARGUS E5 has no warranty.
....view more
- Description Gamdias ARGUS M1 Mid Tower PC Gaming Case Gamdias ARGUS M1 Mid Tower PC Gaming Case comes with A LED strip with Rainbow Color Streaming Lighting that supports RGB Motherboard Sync Software, E-ATX, ATX, Micro-ATX, Mini-ITX Motherboards, CPU cooler height limitation: 168mm, VGA length limitation: 350mm, Easily Switch RGB Streaming Lighting Style, and LED off by one touch. In this casing, the I/O Front Panel with Rainbow Color Streaming Lighting and Independent Switch with the combination of the Front Glass And Plastic, Left Tempered Glass Window and also it is easily Accessible I/O Ports. This casing also has Magnetic Dust Filter and Power Cover Design. This casing is an option for modest elegance because of it's a rainbow color streaming LED strip on the front in a minimalistic style. In this casing, it's front LED strip supports motherboard sync (5v 3-pin) to achieve system-wide RGB lighting synchronization, which makes it easier to unite your group of RGB lights. It's tempered glass and plastic materials makes ARGUS M1 not dull and adds more variety in its look. To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by rainbow streaming light with 14 lighting effects with an independent switch. A vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU, building upon inner beauty of the case. This casing will provides you excellent gaming performance.
....view more
- Description Gamdias ARGUS M2 Mid Tower PC Gaming Case Installed with a rainbow color streaming LED strip on the front in a minimalistic style, ARGUS M2 is an option for modest elegance. To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by rainbow streaming light with 14 lighting effects with an independent switch. ARGUS M2 front LED strip supports motherboard sync (5v 3-pin) to achieve system-wide RGB lighting synchronization, which makes it easier to unite your group of RGB lights. Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.A magnetically held dust filter, located on top of the ARGUS M2 to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter. To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC. A single easy push button, controls the rainbow color streaming LED strip, cycling though the different effects and LED off. ARGUS M2 has a very simple design philosophy: A mid -tower case, the eye-catching rainbow RGB lighting strips on the front, and RGB I/O port panel. Together, minimalistic PC case has a unique style of its own.
....view more
- Description Gamdias ATHENA E1 Elite Mid Tower ARGB Case Gamdias ATHENA E1 Elite Mid Tower ARGB Case designed with mesh patterned front panel alongside of a built-in 120 mm ARGB fan, ATHENA E1 Elite provides not only an unique appearance, but also offers maximized airflow throughout your stunning battle-station. Uniquely Designed Mesh-Patterned Front Panel, 1 Built-in 120 mm ARGB Fan (Front Panel), ARGB Sync Via Motherboard, Magnetic Dust Filter, Panoramic Tempered Glass, Small Form Factor Design, Hyper-Efficient I/O Ports & 3 Slot Vertical VGA Slot with a tap of your fingertip to initiate RGB lighting-effect adjustments / swap. This Casing is capable of initiating RGB sync to any Motherboard that comes in with a 5V 3-Pin addressable header to achieve a system-wide RGB synchronization. Project the rays of wisdom at your allies with a series of breathtaking chromatic lighting-effect with a simple tap of your fingertip. Sticking out with its mesh patterned front panel design, the ATHENA E1 Elite Case gives off a futuristic vibe as the Goddess of Wisdom presents herself in a fashionable debut. Here, Nimble, Elegant, and Concise are the trademarks easily recognizable from the ATHENA E1 Elite PC Gaming Case. Here, internal volume is 25% larger than it's predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available. In this Case, Handy I/O port on the top of the case featuring a ARGB fans control button, that allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port. The accommodation inside ATHENA E1 Elite Case is able to support up to four 120mm or 140mm fans. Mounting points for 280mm, 240mm radiators at the top and 140mm or 120 mm radiator in the rear. This latest Gamdias ATHENA E1 Elite Mid Tower ARGB Case has no warranty.
....view more
- Description Gamdias ATHENA M1 Elite RGB Mid Tower Gaming Case ATHENA M1 Elite is a mid-tower case with asymmetry mesh front panel and three built-in 120mm trio rings ARGB fans on the front. With this design, the pursuit of high heat dissipation, increase air flow, and eye catching design is achieved. Unique and Functional Adopting a detachable asymmetry mesh and three built-in 120mm trio rings ARGB fans, ATHENA M1 Elite provides not only an unique look but also maximum air flow through the case. Sparkling Everywhere To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by neo chrome streaming lights, with more than 20 lighting effects. One Click, Sync All ATHENA M1 Elite supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes you easier to unite your case from chaos to calm. Power Supply Cover Design Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU. Magnetic Dust Filter A magnetically held dust filter, located on top of the ATHENA M1 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter. Seamless Tempered Glass To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC. Light It Up, Speed It Up A single easy push button, controls the 3 ARGB fans and lights surrounded by I/O port, cycling though the different effects and LED off. Another button controls the fans; high, mid, and low speeds, whichever suites your cooling needs. Improved Cable Management To achieve the best PC building experience the ATHENA M1 Elite has an enlarged cable management compartment behind the mainboard plate. Tuck away all your excess cables for an extra clean system and improved case airflow. Ample Accommodation The accommodation inside ATHENA M1 Elite is able to support up to three 120mm or 140mm fans up front. Multiple mounting points for 360/280mm radiators upfront, 280/240mm and a 120mm radiator at the rear.
....view more
- Description: Gamdias ATHENA M2 Elite RGB Mid Tower Gaming Case The ATHENA M2 ELITE is a mid-tower case that distinguishes itself with a bold and daring asymmetrical mesh design that is not only aesthetically pleasing but is also able to achieve high heat dissipation along with efficient stream-lined airflow. CLASSIC REIMAGINED The dark and clean-cut asymmetrical mesh combined with three built-in 120mm trio rings ARGB fans and ARGB light strips provide high-airflow along with brilliant and polished aesthetics. EFFORTLESS ACCESSIBILITY With a detachable asymmetry mesh, a magnetic dust filter, and a seamless tempered glass held together by thumb screws, GAMDIAS redefines what it means to adjust and polish a case. CONTROL AND SYNCHRONIZE The ATHENA M2 supports system-wide ARGB to compatible motherboards with lighting synchronization that controls the 3 ARGB fans and 2 ARGB light strips with a single push of a button. ELITE EXPANSION The ELITE version is able to support up to three 120mm or two 140mm fans upfront. Multiple mounting points for 360/280mm radiators up front, 280mm, 240mm, and a 120/140mm radiator at the rear.
....view more
- Description: Gamdias ATHENA M2 LITE Micro Tower Casing Gamdias ATHENA M2 LITE Micro Tower Casing comes with 2 Built-in 120mm ARGB Fans at the front and 1 at the back of the casing. This casing supports ARGB Sync Via Motherboard. It is designed with Power Cover Design, Magnetic Dust Filter, Seamless Tempered Glass Window. By One Touch to Easily Switch RGB Streaming Lighting Style, and LED off selectable High/Mid/Low Fan Speed. This casing is adopting a detachable asymmetry mesh and two built-in 120mm ARGB fans and also provides not only a unique look but also maximum airflow through the case. The casing supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, which makes it easier to unite your case from chaos to calm. It is built upon the inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU. A cleaner design displaying the internal components of the PC. Here a single easy push button, controls the 2 ARGB fans and 2 ARGB light strips, cycling through the different effects and LED off. Another button controls the fans; high, mid, and low speeds, whichever suites your cooling needs. It has no warranty.
....view more
- Specification: Case Type Type Mid Tower Front Panel mesh front panel Tempered Glass Panel side tempered glass panel Motherboard Support ATX, Micro-ATX, Mini-ITX External Features Color(s) White Material SPCC & ABS & Tempered glass Weight 5.89 kg / 12.99 lb Dimensions 410 x 230 x 477 mm Expansion Slots 7 Radiator Support Top: 240mm / Front: 360mm、280mm、240mm / Rear: 120mm、140mm Fan Support Top: 2 x 120mm 、2 x 140mm Front: 3 x 120mm、2 x 140mm Rear: 1 x 120mm / 1 x 140mm Pre- Installed Fans Front: 3 x 120mm ARGB PWM Fans(Compatible with AEOLUS Box) Rear: 1 x 120mm ARGB PWM Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5" I/O Port USB 3.0 x1、USB 2.0 x2、HD Audio x1、LED control x1 Additional Feature PSU 180mm Side Panel Seamless Tempered Glass Window Clearance Space Maximum CPU Cooler Height 190mm Maximum Graphics Card Length 340mm Maximum PSU Length 180mm Warranty Warranty No Warranty Description: Gamdias ATHENA M6 WH Mid-Tower ATX Gaming Case The Gamdias ATHENA M6 WH Gaming Casing is a perforated mid-tower case that prioritizes ventilation and illumination. To offer excellent airflow and intrinsic under-glow lighting, the case has four built-in 120mm ARGB PWM fans, a panoramic mesh front panel, and triple-sided RGB light strips. The pillar-shaped panoramic mesh screen is intended to improve air intake and filtration while also optimizing airflow throughout the casing. 3+1 ARGB PWM Fans The Gamdias ATHENA M6 WH casing comes with four high-performance ARGB PWM fans with up to 2000RPM to create a visually stunning RGB case with powerful airflow. Heightened Airflow The lower compartment of the chassis takes on a perforated design and the elevated case stands to allow massive air intake and exhaust on all sides of the case. Control and Synchronize The Gamdias ATHENA M6 WH casing supports system-wide ARGB to compatible motherboards with lighting synchronization that controls the 4 built-in ARGB fans and 3 ARGB light strips with a single push of a button. Tempered Glass Panel The side tempered glass panel features a tool-free slide-off design and is scratch-resistant and transparent for a clear view of your build. Simple and Accessible The Gamdias ATHENA M6 WH casing I/O is equipped at the top front of the case, featuring with 2x USB port, 1x USB 3.0 port, LED lighting controls, and additional audio connectivity. Compatibility & Magnetic Dust Filter The Gamdias ATHENA M6 WH casing supports up to 6 fans and up to a 360mm radiator in the front and 240mm at the top. In order to make cleaning out dust easier than ever, the case is equipped with dust filters on the top and bottom of the case. Out of Sight, Out of Mind The hidden compartment has ample room for cable management optimization and supports PSU lengths up to 180mm. The Gamdias ATHENA M6 WH Mid-Tower ATX Casing has no warranty.
....view more
- Casing Mainboard Type ATX、Micro-ATX、Mini-ITX Case Type MID Tower Cooling System Cooling Fan Top: 3 X 120mm 、2 X 140mm / Front: 3 X 120mm、3 X 140mm/ Rear: 1 X 120mm Radiator Top: 360mm、280mm、 240mm / Front: 360mm、280mm、240mm / Rear: 120mm Cooling Support Front: 3 X 120mm ARGB Fans/ Rear: 1 X 120mm ARGB Fan Ports Drive Bays 2 X 3.5" Or 1 X 2.5"+1 X 3.5"(HDD Cage) 2 X 2.5"(HDD Cage) + 2 X 2.5'' (SSD Bracket) I/O Port USB 3.0 X1, USB 2.0 X1, Type C X 1, HD Audio X1, LED Control X1 Technical Info Model ATHENA P1 Physical Specification Expansion Slots 7 Maximum Cable Management Space 5V 3-Pin Addressable Header Dimension 465 X 220 X 485 Mm 18.3 X 8.6 X 19.8 Inch Others Other Features Material - SPCC & ABS & Tempered Glass CPU Cooler Height Limitation:170mm VGA Length Limitation:405mm PSU Length Limitation:210mm GAMDIAS ATHENA P1 MID TOWER GAMING CASE PRICE IN BD The GAMDIAS Athena P1 Mid Tower Gaming Case - the perfect combination of style, performance, and affordability for gaming enthusiasts. Designed with a focus on delivering an exceptional gaming experience, this case offers a plethora of features that will elevate your PC gaming setup to the next level. The GAMDIAS Athena P1 Mid Tower Gaming Case boasts a sleek and modern design that is sure to catch the eye of any tech enthusiast. Its tempered glass side panel showcases your high-performance components and RGB lighting in all their glory, adding a touch of elegance to your gaming rig. Not only does this case offer aesthetics, but it also prioritizes functionality. With ample space and excellent cable management options, you can keep your components organized and ensure optimal airflow for efficient cooling. The case supports multiple fans and radiators, allowing you to create a powerful cooling system to prevent overheating during intense gaming sessions. The GAMDIAS Athena P1 Mid Tower Gaming Case is also equipped with convenient features for hassle-free installations. Tool-free drive bays and a modular design make it easy to install and upgrade your components without the need for additional tools. Additionally, this case provides excellent compatibility with a wide range of hardware configurations, accommodating motherboards of various sizes, including ATX, Micro-ATX, and Mini-ITX. It offers ample storage options, with support for multiple HDDs and SSDs, ensuring you have enough space to store all your favorite games and media files.
....view more
- Specification: Case Type Type Mid Tower Front Panel mesh front panel Tempered Glass Panel side tempered glass panel Motherboard Support ATX, Micro-ATX, Mini-ITX External Features Color(s) Black Material SPCC & ABS & Tempered glass Weight 4.9 kg Dimensions 352 x 200 x 442 mm 13.9 x 7.9 x 17.4 inch Expansion Slots 7 Radiator Support Front:240mm / Rear:120mm Fan Support Top: 2 x 120mm Front: 3 x 120mm, 2 x 140mm Rear: 1 x 120mm Pre- Installed Fans Front: 3 x 120mm ARGB Fan Rear: 1 x 120mm ARGB Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5" I/O Port USB 3.0 x1 USB 2.0 x2 HD Audio x1 LED Control x1 Additional Feature Side Panel Seamless Tempered Glass Window Clearance Space Maximum CPU Cooler Height 160mm Maximum Graphics Card Length 260mm Maximum PSU Length 150mm Warranty Warranty No Warranty Description Gamdias AURA GC1 Mesh ARGB Mid-tower ATX Gaming Casing The Gamdias AURA GC1 Mesh ARGB is a low-cost mid-tower Casing with a stylish and compact appearance. With a black mesh front panel for unrestricted airflow, four built-in ARGB fans, and a panoramic tempered glass side panel to showcase the elegance of your setup. The Gamdias AURA GC1 boasts a sleek stealth black design with an airflow-focused mesh front panel to enhance aesthetics and outstanding airflow intake. 3+1 Built-In ARGB Fans The Gamdias AURA GC1 Mesh RGB Mid-tower ATX Gaming Casing comes with four built-in 120mm ARGB fans that are visible via the mesh front panel and the tempered glass side panel. Panoramic Tempered Glass Show off the inner beauty of your system with a full-sized tempered glass cover that installs without the need for tools. One Click. Sync All The Gamdias AURA GC1 shell allows ARGB connectivity to compatible motherboards in order to achieve system-wide lighting synchronization, making it easy to combine the case from chaos to peace. This casing has no warranty.
....view more
- Specification: Case Type Type Mid Tower Front Panel mesh front panel Tempered Glass Panel side tempered glass panel Motherboard Support ATX, Micro-ATX, Mini-ITX External Features Color(s) Black Material SPCC & ABS & Tempered glass Weight 4.9 kg Dimensions 352 x 200 x 442 mm 13.9 x 7.9 x 17.4 inch Expansion Slots 7 Radiator Support Front:240mm / Rear:120mm Fan Support Top: 2 x 120mm / Front: 3 x 120mm、 2 x 140mm Pre- Installed Fans Front: 3 x 120mm ARGB Fan Rear: 1 x 120mm ARGB Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5" I/O Port USB 3.0 x1 USB 2.0 x2 HD Audio x1 LED Control x1 Additional Feature Side Panel Seamless Tempered Glass Window Clearance Space Maximum CPU Cooler Height 160mm Maximum Graphics Card Length 260mm Maximum PSU Length 150mm Warranty Warranty No Warranty Description Gamdias AURA GC2 Mesh ARGB Mid-tower ATX Gaming Casing The Gamdias AURA GC2 Mesh ARGB Mid-tower ATX Casing is a low-cost mid-tower case with a focus on ventilation. A chamfered front panel with perforated air vents, 4 built-in ARGB fans, and a panoramic tempered glass side panel to show off the beauty of your design are all included. Modish Perforated Front Panel The Gamdias AURA GC2 Mesh ARGB Mid-tower ATX Casing comes with a sleek black front panel with 4.0mm perforated air vents and a chamfered design to provide superior air intake. 3+1 Built-In ARGB Fans The Gamdias AURA GC2 Mesh ARGB Mid-tower ATX Casing is well equipped with 4 built-in 120mm ARGB fans displayed in full by the mesh front panel and the tempered glass side panel. Panoramic Tempered Glass The Gamdias AURA GC2 Mesh ARGB Mid-tower ATX Casing Showcase the inner beauty of your system in full with a full-sized tempered glass cover with tool-free installation for ease of access. One Click. Sync All The Gamdias AURA GC2 Mesh ARGB Mid-tower ATX Casing supports RGB connection to compatible motherboards to achieve system-wide lighting synchronization, making it easier to unite the case from chaos to calm.
....view more
- Specification Case Type Type Mid Tower Front Panel mesh front panel Tempered Glass Panel Tool-Free Installation Tempered Glass Window Motherboard Support ATX, Micro-ATX, Mini-ITX External Features Color(s) Black Material SPCC & ABS & Tempered glass Weight 4.9 kg Dimensions 352 x 200 x 442 mm 13.9 x 7.9 x 17.4 inch Expansion Slots 7 Radiator Support Front:240mm / Rear:120mm Fan Support Top: 2 x 120mm Front: 3 x 120mm, 2 x 140mm Rear: 1 x 120mm Pre- Installed Fans Rear: 1 x 120mm ARGB Fan Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5" I/O Port USB 3.0 x1 USB 2.0 x2 HD Audio x1 LED Control x1 Additional Feature PSU Not Included Side Panel Seamless Tempered Glass Window Clearance Space Maximum CPU Cooler Height 160mm Maximum Graphics Card Length 260mm Maximum PSU Length 150mm Warranty Warranty No Warranty Description Gamdias AURA GC3 Distinctive Mesh ARGB Mid-tower Casing The Gamdias AURA GC3 is a remarkable mid-tower casing designed to provide both style and functionality to PC enthusiasts. Its standout feature is the mesh front panel, which not only enhances the overall aesthetics of the casing but also improves airflow for efficient cooling. With a Mesh Front Panel, Dual Front Panel Light Strips, and 1 Built-in 120mm ARGB Fan, it offers superior airflow and stunning customizable lighting effects. The casing supports Mini-ITX, Micro-ATX, and ATX Motherboards, while its Tool-Free Installation and Tempered Glass Window provide convenience and style. Stay dust-free with the Magnetic Dust Filter and sync effortlessly with a 5V ARGB Motherboard. Upgrade your PC with the Gamdias AURA GC3 for a powerful and visually striking build. ARGB Mesh Front Panel The AURA GC3 features a mesh front panel that combines a stylish appearance with outstanding internal airflow for optimal performance. 2 Light Strips + 1 ARGB Fan The enclosure features twin light strips on its front panel, accompanied by an included ARGB fan, providing a unique RGB ambiance. Panoramic Tempered Glass Exhibit the complete internal elegance of your system by utilizing panoramic tempered glass, which allows for effortless installation without the need for tools, ensuring convenient accessibility. One Click. Sync All To bring harmony to your system, AURA GC3 allows for RGB connectivity with compatible motherboards, enabling seamless synchronization of lighting across the entire system. This feature effortlessly transforms the case, bringing order and tranquility out of chaos.
....view more
- Description Gamdias MARS E2 Micro Tower Casing White "Simple, yet Refined." The Mars E2 Micro-Tower Gaming PC Case, ascending into the starry night with its compact and minimalistic stature alongside of its moonlit textured anodize-brushed aluminum coated anterior, support Motherboards up to the size of micro-ATX. Pairing up with its exquisitely contrived hinged tempered-glass panel layout --- the Agronomical Guardian steals the spotlight of the show with his elegant demeanor! The Crescent's Embrace Being as pale, yet elegant as the new-moon adrift in the starry night sky, the MARS E2 is gently coated with our meticulously engineered Aircraft-Grade anodized aluminum spray-paint. Retaining to a simplistic yet sophisticated style for gaming has never been more easier! Majestic Exhibition The exquisitely contrived hinged tempered-glass panel design, enables easy accessibility to its internal apparatus, allowing YOU to put your amazing rig on display, and show it off with pride! Exlusive Operational Layout Debuting with its uniquely designed hyper-efficient rear mounted I/O panel layout, the MARS E2 present itself in a user-friendly mannerism that drastically shortens the distance between the hinged tempered-glass panel knob & the I/O directory, while enabling easier accessibility towards major rig modifications. Keeping it Slick An addition to a removable magnetic dust filter atop of the MARS E2 Gaming PC Case would in fact, serve as a substantial asset to keep your battle-station neat and tidy! Ample Accommodation The ample component clearance of the MARS E2 is capable of supporting up to five 120 mm fans & mounting slots for a 280 mm (Front) x 240 mm (Top) x 120 mm (Rear) radiator --- all at your disposal!
....view more
- Description Gamdias Mars M1 Mid Tower Gaming Casing Forged by the raging inferno, the sharp shimmer, and sturdy structure become the signature of the MARS series. The anodized aluminum tower turns into the incarnation of the God of war, MARS, rising and dazzling the entire realm. Boasts on its straightforward installation, the MARS M1 is equipped with seamless tempered glass. Therefore you are able to function the side window without any tools, which displays your internal rig through a 4mm tinted panoramic tempered glass side panel. Let the masterpiece astonish the whole planet! Handy I/O port on the top of the case featuring in an RGB light strips control button, allowing you to cycle through the lighting effects by a simple button. High-speed USB 3.0, two USB 2.0 ports, an HD audio jack, and a power button are included on the top of the case. The removable dust filter is magnetically attached at the top of the case, a design feature to minimize internal dust and making it easy to clean. Being compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and AS Rock Polychrome motherboard RGB software, MARS M1 is able to synchronize with any MB that incorporates with a 5V 3-Pin addressable RGB header. Rev up the gaming atmosphere through these sensational lighting effects by MARS M1 now! The accommodation inside MARS M1 is able to support up to six 120mm fans. Mounting points for a 280mm, 240mm radiator at the top and front, 120 mm radiator in the rear. Mars M1 is a mid-tower case with an anodized aluminum panel and a LED strip with rainbow color streaming effects. Motherboard supports up to ATX. Furthermore, the case is being compatible with the latest 5V ARGB motherboard synchronization; you can have spectacular lighting effects on the case. To sum up, it is a sturdy tower that helps you claims every victory.
....view more
- Description Gamdias MARS M2 Micro Tower Casing Black A Cosmic Biochemichal Armament The Mars M2 Micro-Tower Gaming PC Case, kicking in with its compact aircraft grade anodized brushed aluminum coated anterior, support Motherboards up to the size of micro-ATX alongisde of its Motherboard Sync functionality, enabling a system-wide RGB synchronization via 5V3-Pin Addressable RGB Header. Comboing up with the exquisitely contrived hinged tempered-glass panel layout, alongside of its ARGB I/O Port & Power-Switch --- the extraterrestrial combatant is ready to unleash his arcane mastery and take gaming into the next stratosphere! Galactic RGB Comet Soaring through light-years of galaxy with his blinding speed of luminosity, the MARS M2 emit cosmic beams of RGB from its hyper-efficient ARGB I/O Port and Power-Switch via its Aircraft-Grade black anodize-brushed steel coated anterior, showing them off with grace and elegance! Raising the Stakes! Being compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Motherboard RGB application, the MARS M2 proudly boasts its Motherboard Sync functionality to achieve a system-wide RGB Synchronization via 5V3-Pin Addressable RGB Headers, where the RGB effects could be adjusted directly via the software designated to your Motherboard. Majestic Exhibition The exquisitely contrived hinged tempered-glass panel design, enables easy accessibility to its internal apparatus, allowing YOU to put your amazing rig on display, and show it off with pride! Keeping it Slick An addition to a removable magnetic dust filter atop of the MARS M2 Gaming PC Case would in fact, serve as a substantial asset to keep your battle-station neat and tidy! Ample Accommodation The ample component clearance of the MARS M2 is capable of supporting up to five 120 mm fans & mounting slots for a 280 mm (Front) x 240 mm (Top) x 120 mm (Rear) radiator --- all at your disposal!
....view more
- Description Gamdias TALOS E1 Mini Tower Case has mini –tower case with front trapezoidal tempered glass panel, one left swing door.With a trapezoidal tempered glass allowing high air flow to the front, and RGB Fan lighting around the front, your PC case will look sleek and edgy.Sleek tempered glass panels fully display all components and lead the user to a brand new modding experience!TALOS E1 comes with one side swing door held closed, two built-in 120mm ring RGB fans. Not only showcasing all the components, also make modding easier and more convenient.TALOS E1 supports connection to compatible motherboards to achieve system-wide RGB lighting synchronization, makes you easier to unite your case from chaos to calm.To provide easy access and connectivity for all your devices, the top panel features a USB 3.0 and two USB 2.0 data ports as well as audio passthrough and the RGB fan lighting control switch.
....view more
- Description Gamdias TALOS E2 Elite Mid Tower ARGB Case Gamdias TALOS E2 Elite Mid Tower ARGB Case comes with a trapezoidal tempered glass and three built-in 120mm ARGB fans to allow high air flow go through the aggressive angled slots. This ARGB Case has Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button and also it features the trapezoidal tempered glass front panel and eye-catching trio of 120mm ARGB lighting fans. With the new side swinging magnetically closing tempered glass side panel to top any extravagant ARGB battle station.. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port. In this Casing, A magnetically held dust filter, located on top of the TALOS E2 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter. Here, A clean designed side glass panel without the thumb screws getting in the way visually. A unique designed mechanism which allows the side glass panel to slide and clip right into the case. Therefore you are able to function the 4mm tinted tempered glass with ease, which displays your internal rig components. The TALOS E2 Elite ARGB Case comes with a single side magnetic closing tempered glass swinging door. Not only showcasing all the components, also makes modding easier and more convenient. The accommodation inside TALOS E2 Elite is able to support up to six 120mm fans. Mounting points for 280mm, 240mm radiators at the top and additional 360mm at front, 140mm or 120 mm radiator in the rear. Here it's internal volume is 15% larger than it's predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available. The latest Gamdias TALOS E2 Elite Mid Tower ARGB Case has no warranty.
....view more
- Specification: Case Type Type MID Tower Tempered Glass Panel Side Panel Motherboard Support ATX, Micro-ATX, Mini-ITX External Features Color(s) Black Material SPCC & ABS & Tempered glass Dimensions 363 x 210 x 447 mm Front Ports USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1 Expansion Slots 7 Radiator Support Top: 240mm / Front: 360mm (The removement of HDD cage is suggested)、280mm / Rear: 120mm Fan Support Top: 2 x 120mm / Front: 2 x 120mm、 2 x 140mm / Rear: 1 x 120mm Pre- Installed Fans Front: 2 x 120mm ARGB Fans Rear: 1 x 120mm ARGB Fan Drive Bays 2 x 3.5" or 1 x 2.5" + 1 x 3.5" (HDD Cage) / 2 x 2.5" I/O Port USB 3.0 x1 USB 2.0 x2 HD Audio x1 Fan LED Control x1 Additional Feature PSU Not Include Side Panel Tempered Glass Clearance Space Maximum CPU Cooler Height 160mm Maximum Graphics Card Length 300mm Maximum PSU Length 150mm Warranty Warranty No Warranty Description Gamdias TALOS E3 MESH Mid Tower Case The Gamdias TALOS E3 MESH Mid Tower Case is a gorgeous and elegant case ideal for PC enthusiasts. The front panel of the case is perforated at 5.0mm, allowing for excellent ventilation to keep your components cool. It can also sync with a 5V ARGB motherboard to produce amazing RGB lighting effects. The case includes a tempered glass side window that allows you to see the components inside and show off your construction. To further improve the aesthetics, the TALOS E3 MESH includes three built-in 120mm ARGB fans to bring a splash of color to your design. The case also incorporates a tool-free installation tempered glass pane, making it simple to install and remove components. With the one-touch function, you can effortlessly choose between RGB lighting schemes. The TALOS E3 MESH supports ATX motherboards and has a power cover design that conceals your connections for a clean and orderly appearance. A magnetic dust filter is also included in the casing to assist keep your components free of dust and dirt. Forged for Airflow The Gamdias TALOS E3 MESH Mid Tower Case combines a small design with excellent airflow performance. The case has three built-in 120mm ARGB fans and a 5.0mm perforated front panel to maximize airflow performance while maintaining a minimalist aesthetic with tempered glass side panels and a PSU cover design. Vented Front Panel The Gamdias TALOS E3 MESH Mid Tower Case has a perforated front panel with 5.0mm air vents built for enhanced air intake and temperature control. 3 3 Built-In ARGB Fans The Gamdias TALOS E3 MESH Mid Tower Case comes with three built-in 120mm ARGB fans for strong airflow and an RGB visual feast. Show Off Your Build The Gamdias TALOS E3 MESH Mid Tower Case enables system-wide ARGB to compatible motherboards, with lighting synchronization visible via the perforated front panel and tempered glass side panel. Simple and Accessible The top front of the casing has the I/O, which includes 2x USB ports, 1x USB 3.0 port, LED illumination controls, and extra audio connections. Cooling Compatibility The Gamdias TALOS E3 MESH Mid Tower Case can accommodate two 120mm or 140mm fans at the front. There are many mounting positions for 360/280/240mm radiators in the front and 280/240/120mm radiators in the back. Interior Accommodation The TALOS E3 MESH Mid Tower Case from Gamdias The case's small design allows it to host up to ATX motherboards and VGA cards up to 300mm in length. Flexible Storage Solution The interior configuration has ample room for cable management optimization and supports PSU lengths up to 150mm. Magnetic Dust Filter The Gamdias TALOS E3 MESH Mid Tower Case To make cleaning out dust easier than ever, the case is equipped with dust filters on the top and bottom of the case.
....view more
Featured Products
AMD Ryzen 5 5600X Processor
৳ 19000
৳ 20000
Corsair Katar PRO Ultra Light Gaming Mouse Black
৳ 1400
৳ 1400
VALUE TOP T22VF 21.5 INCH FULL HD LED MONITOR
৳ 8600
৳ 9000
Cooler Master Hyper 212 LED Turbo ARGB Air CPU Cooler
৳ 4500
৳ 5000
DeepCool AK400 ZERO DARK PLUS CPU Cooler
৳ 3550
৳ 4000
Corsair iCUE H115i 280mm Elite Capellix Liquid CPU Cooler
৳ 15500
৳ 16000
Top Rated Products
NZXT H510 ELITE COMPACT ATX MID TOWER CASE (MATTE BLACK)
৳ 13000
৳ 13000
Asus PRIME B760-PLUS D4 DDR4 Intel Motherboard
৳ 22500
৳ 22500
CORSAIR VENGEANCE LPX 8GB DDR4 3200MHZ DESKTOP RAM
৳ 2700
৳ 3000
Intel Arc A750 Limited Edition 8GB GDDR6 Graphics Card
৳ 28000
৳ 32000
Acer RE100 128GB 2.5" SATA lll SSD
৳ 2100
৳ 2550
Top Selling Products
Asus TUF Gaming Z690-Plus D4 12th Gen ATX Motherboard
৳ 26000
৳ 28600
HP M22f 22" FHD IPS Monitor
৳ 14600
৳ 15100
AMD Ryzen 5 5600G Processor with Radeon Graphics (LOCAL BOX)
৳ 13500
৳ 15000
PC POWER ICE CUBE WHITE DESKTOP GAMING CASING
৳ 5900
৳ 6200
Delivery
With sites, we ship to all over Bangladesh & it's regions.
Safe Payment
Pay with the world’s most popular and secure payment methods.
Shop with Confidence
Our Buyer Protection covers your purchase from click to delivery.
24/7 Help Center
Round-the-clock assistance for a smooth shopping experience.